Stock available Adelaide, Brisbane, Auckland, Christchurch, Melbourne, Mackay, Newcastle, Darwin, Perth and Sydney.
Not all Steel Abrasives are created equal.
Our extensive range of abrasives are manufactured from the very best raw materials.
Our Steel Shot, for example, has a regular shape and is sized and weighted perfectly so it can be used over and over again. Our competitors tend to have irregular shaped shot which will produce poor results and take a longer time.
Steel Shot
- Manufactured hypereutectoid steel abrasive
- Grey, metal spheres
- Used in airless wheel blast machines to clean foundry castings, surface polishing and shot peening
- Also used in portable trackblast airless wheel blast machines for concrete floor preparation and profiling
- Very long lasting
- Can be recycled many times
- Hardness: 40-50 HRc
- 55lb (25kg) bags or 2000lb (909kg) drums
Available Grades
S1100.012" - 0.02" (0.3 - 0.5mm)
S1700.0168" - 0.0284" (0.42 - 0.71mm)
S2300.024" - 0.034" (0.6 - 0.85mm)
S2800.0284" - 0.04" (0.71 - 1.0mm)
S3300.034" - 0.048" (0.85 - 1.2mm)
S3900.04" - 0.056" (1.0 - 1.4mm)
S4600.048" - 0.068" (1.2 - 1.7mm)
S5500.056" - 0.068" (1.4 - 2.0mm)
S6600.068" - 0.092" (1.7 - 2.3mm)
Chilled Iron Grit
- Manufactured cast haematite iron abrasive
- Grey, angular granules
- High performance, hard, sharp abrasive
- Used in airblast rooms
- Maintains sharp angular shape as it wears
- Can be recycled many times
- 55lb (25kg) bags or 2000lb (909kg) drums
Available Grades
G050.0048" - 0.012" (0.12 - 0.3mm)
G070.0072" - 0.0168" (0.18 - 0.42mm)
G120.012" - 0.0284" (0.3 - 0.71mm)
G170.0168" - 0.034" (0.42 - 0.85mm)
G240.024" - 0.04" (0.6 - 1.0mm)
G390.034" - 0.048" (0.85 - 1.2mm)
G550.056" - 0.08" (1.4 - 2.0mm)
Cast Steel Grit
- Manufactured cast steel abrasive
- Blue grey, angular granules
- High performance, cleaning and descaling abrasive
- Used mainly in airless wheel blast machines
- Sharp edges gradually round over as it wears
- Can be recycled many times
- Standard GL and GH hardness grit
- Hardness: GL = 56-60 HRc, GH = 60-65 HRc
- 55lb (25kg) bags or 2000lb (909kg) drums
Available Grades
GL800.0072" - 0.0168" (0.18 - 0.42mm)
GL500.012" - 0.0284" (0.3 - 0.71mm)
GL400.0168" - 0.04" (0.42 - 1.0mm)
GL250.028" - 0.048" (0.7 - 1.2mm)
GL180.04" - 0.056" (1.0 - 1.4mm)
GL160.048" - 0.068" (1.2 - 1.7mm)
Mild Steel Cut Wire
- Manufactured steel abrasive
- Used mainly in airless wheel blast machines to create a specific desired finish
- Will create a very even and consistent finish
- Can be recycled many times
- 55lb (25kg) bags or 2000lb (909kg) drums
Available Grades
0.024" (0.6mm)
0.032" (0.8mm)
0.036" (0.9mm)
0.04" (1.0mm)
0.048" (1.2mm)
Stainless Steel Shot
- Manufactured stainless steel abrasive
- Used mainly in airless wheel blast machines to create a specific desired finish or where a non-ferrous abrasive is required
- Can be recycled many times
- 55lb (25kg) bags or 2000lb (909kg) drums
Available Grades
S100.002"-0.008" (0.05-0.2mm)
S200.0036"-0.012" (0.09-0.30mm)
S300.0056"-0.02" (0.14-0.5mm)
S400.016"-0.032" (0.4-0.8mm)
S500.024"-0.04" (0.6-1.0mm)
S600.03"-0.05" (0.75-1.25mm)
S1000.04"-0.056" (1.0-1.4mm)
S2000.056"-0.08" (1.4-2.0mm)
Stainless Steel Grit
- Manufactured stainless steel abrasive
- Used mainly in an air-blast application to create a specific desired finish or where a non-ferrous abrasive is required
- Sharp edges gradually round over as it wears
- Can be recycled many times
- 55lb (25kg) bags or 2000lb (909kg) drums
Available Grades
GH100.002"-0.008" (0.05-0.2mm)
GH200.036"-0.012" (0.09-0.30mm)
GH300.0056"-0.02" (0.14-0.5mm)
GH400.016"-0.032" (0.4-0.8mm)
GH50.024"-0.04" (0.6-1.0mm)
GH600.03"-0.05" (0.75-1.25mm)
GH1000.04"-0.056" (1.0-1.4mm)
GH2000.056"-0.08" (1.4-2.0mm)
Stainless Steel Cut Wire
- Manufactured stainless steel abrasive
- Used mainly in airless wheel blast machines to create a specific desired finish or where a non-ferrous abrasive is required
- Can be recycled many times
- 55lb (25kg) bags
Available Grades
0.026" (0.65mm)
0.028" (0.7mm)
0.048" (1.2mm)
Aluminum Oxide Abrasive
- Manufactured ceramic abrasive
- Cost effective if contained and recycled
- Very hard, aggressive, high performance abrasive used in blast cabinets
- 55lb (25kg) bags and bulk bags
Available Grades
Brown for general industrial use
White for extended life and sanitary use
Warning: When recycling this media, observation of respiratory protection with Personal Protection Equipment (PPE) may be necessary
Silicon Carbide Abrasive
- Manufactured ceramic abrasive
- Cost effective if contained and recycled
- Extremely hard, aggressive, high performance abrasive used for cleaning and preparing very hard surfaces
- 55lb (25kg) bags and bulk bags
Available Grades
#10 #12 #14 #16 #20
#24 #30 #36 #46 #60
#80 #100 #120 #150 #180
#220 #240
Warning: When recycling this media, observation of respiratory protection with Personal Protection Equipment (PPE) may be necessary
Glass Beads Abrasive
- Manufactured glass abrasive
- Miniature, translucent glass spheres
- Spherical beads impart a satin or matte ‘shot peened’ finish to the work surface
- Widely used in hand cabinets for surface cleaning rather than surface etching
- Can be recycled
- 55lb (25kg) bags
Warning: Glass dust generated by blasting may cause severe irritation of the skin, eyes, nose and throat with bleeding and discomfort. Check with your local Worksafe Authority Municipal Department and the Environment Protection Agency (EPA) prior to use.
Available Grades
A(850-600µm)
B(600-425µm)
C(425-250µm)
AB(300-180µm)
AC(250-150µm)
AD(212-106µm)
AE(150-90µm)
AH(90-44µm)
AI(<53µm)
INDA(300-106µm)
